10.5 Automatic lowering WTA 13 - 2
This is an optional item to go with the upper and lower conveyor rollers. It enables the
stitches to be adjusted from the beginning of the s eam to the automatic lowering of the
upper roller. This ensures that the roller is not lowered until the material is beneath it.
Manual operation
Parameter Function
F-186 = 0 Lowering or lifting the feed roller through
actuating the button.
Automatic operation
Parameter Function
F-186 > 0 Automatic l owering of the roller after a
number of stitches have been set
F-260 = ON or OFF Stitch delay after sewing foot lowering until roller
lowering in the seam
OFF = Stitch delay Off
ON = Stitch delay On
F-261= 0 Lift roller, but without sewing foot lift and backtack
F-261 = 1 Lift roller with sewing foot lift and backtack
F-261 Lift roller only with sewing foot lift
F-261 Lift roller only with backtack
F-262 Roller remains lowered when switching on high lift
for walking foot
F-262 = 1 Roller is lifted, when switching on high lift for
walking foot
38
To Next Page
Loading...
Need help?
General
