DURKOPP ADLER 767 Operating Instructions

Service Mode
For mechanical adjustments, the SSD has to be switched into the service mode.
In this mode the thread monitor will be disabled.
Following steps are necessary to come into this mode.
–
Switch off the machine
(it should be off for longer than 2 s ec.)
–
Hold the touch-key onto the SSD and
–
Switch on the machine again
The LED flashes, indicating that the thread monitor is disabled.
The machine stays in the service mode until it is switched off again.
44

DURKOPP ADLER 767 Specifications

General

Brand	DURKOPP ADLER
Model	767
Category	Sewing Machine
Language	English