4. Pneumatic connection
The pneumatic system of the special sewing machine and its optional equipment must
be connected to a supply of moisture-free compressed air.
Air pressure must be between 8 and 10 bar.
Connecting the compressed-air maintenance unit
–
Connect hose 2 (order no. 0797 003031) to the compressed-air supply with an
R ¼" hose connector.
Adjusting the operating pressure
Operating pressure is 6 bar. It c an be read from the pressure gauge.
–
To increase pressure: lift twist grip 1 and turn clockwise.
To decrease pressure: lift twist grip 1 and turn anti-clockwise.
10
1
2
To Next Page
Loading...
Need help?
General
