5.2 Lubricating wicks and felt
The wicks and felt 1 must be soaked with a little oil when setting up the machine and
following any extended period of disuse.
–
Unscrew cap 2.
–
Soak wicks and felt 1 with a little oil.
–
Replace and tighten cap 2.
The felt tab 3 of the cap must be clamped between the recirculating felt 4 and the
nipple of the wick 6.
The film 5 must be in c ontact with the inside of the cap.
GB
13
23
456
1
To Next Page
Loading...
