dutch id PHANTOM - Analysing Ride Data with the Bosch Flow App; Optional: Adjusting The On-Board Computer; Optional: Changing The On-Board Computer

73
EN
3. Removetheon-boardcomputerbypullingtheon-boardcomputertowardsyouandlngthe
underside up.
NOTICE
Always take the on-board computer with you if you park the e-bike somewhere.
4.6.1. Oponal:adjusngtheon-boardcomputer
Youcanalsoadjusttheon-boardcomputersoitisaachedtothehandlebarsatthedesired
angletoreadthedisplayopmally.
1. Loosentheadjusngscrewonthesideoftheholderunlyoucanlttheholder.UseaTorx
T20 screwdriver for this.
Figure 17 - Loosening and adjusng the holder.
2. Tightentheadjusngscrewoftheholderagaininthedesiredangle.
4.6.2. Oponal:Changingtheon-boardcomputer
Itispossibletoreplacetheon-boardcomputerKiox300withyoursmartphone.Todoso,you
need to purchase the SmartPhoneGrip from Bosch. Ask your dealer or have a look at the Bosch
eBikewebpageformoreinformaon.
4
The e-bike will automatically turn off to save energy after 10 minutes of inactivity.
4.7. Analysing ride data with the Bosch Flow app
To download all data from the on-board computer 4 , you can install the Bosch Flow app
(available in the App Store or Google Play Store) on your smartphone. You can use this app to
analyse ride data and routes etc.