Dux 21ENB5N - Bathroom 2 Controller (ECB2 D)

Owner's Guide
11
Part: XXXXX Rev XX
Temperature setting
Error Code
(Eg.: 40°C)
Priority Indicator
Burner on Indicator
Display
Display
Operation Button
Setting Buttons
BATHROOM2
ECB2D
ON/OFF
Bathroom 2 Controller (ECB2D) <Optional>
What is actually displayed depends on how the water heater is set.
When this indicator is lit,
the hot water temperature
can be set. ( p.16)
When burning, the
indicator is lit.
A number will flash if
a failure occurs.
( p.28)
For turning the water
heater on or off.
For setting the hot
Water temperature.
( p.14 -15)
* Before use, remove the protective sheet from the remote controller surface.
The illustration below shows the remote controller display.
What is actually displayed depends on how the water heater is set.