Specications and materials may change without notice.
Effective for electric boosted solar water heaters manufactured and sold after 1 January 2012.
Installation by a licensed tradesperson and in
accordance with:
• AS/NZS 3500.4 “National Plumbing &
Drainage Code Hot Water Supply Systems
– Acceptable Solutions”
• Adherence to local authority and OH&S
regulations
• Victorian PIC Requirements
Carefully remove all packaging and
transit protection from the heater before
installation. Dispose of the packaging
responsibly using re-cycling facilities
where they exist.
H3163 025247 Rev. C
For advice, repairs and service, call:
1300 365 115 (Australia)
0800 729 389 (New Zealand)
Models: 2F136S
2F136SD
3F136S
3F136SD
4F136S
4F136SD
2S136ED
3S136ED
4S136ED
Installer’s Guide
For an easier installation, please read this document before you begin.
On completion, sign and leave with owner.
Electric Boosted Solar
Water Heater
To Next Page
Need help?
General
