4.3.6 Self-timer
This function allows you to capture an image of yourself by adding
a 10 second delay between when the Shutter button is pressed and
when the picture is actually taken.
1. Turn the video camera on and ensure it is in Camera
mode.
2. Press the MENU button and move the joystick down to go
to the next page and highlight the Self-timer option. Press
the center joystick button to display the submenu.
3. Use the joystick to select Off, 10 sec., or 20 sec. Press the
center joystick button to confirm.
4. Press the MENU button again to exit the menu.
5. Press the Shutter button and the self-timer starts. An
image is captured after the specified time delay.
62
To Next Page
Loading...
Need help?
General
