4.6 Setup menu
The Setup menu can be accessed from any camera mode and is used
to configure miscellaneous camera functions.
4.6.1 Date/time
See section 2.6.1 “Setting the date and time”.
4.6.2 Beep
1. Turn the video camera on, and press the MENU button to
display the menu screen.
2. Move the joystick right to display the Setup menu and
use the joystick to highlight the Beep option. Press the
center joystick button to display the submenu.
3. Use the joystick to turn the beep on/off, and press the
center joystick button to confirm.
4. Press the MENU button again to exit the menu.
73
To Next Page
Loading...
Need help?
General
