DynalinkXDL-WRX36 | FAQ & Troubleshooting
19
How to update the Router’s firmware to the latest version?
Launch a browser and log in to the web user interface. Navigate to System Settings > Firmware and see the
configuration settings of Upgrade from Internet. Use the Check button to inspect the latest firmware version. An
information prompt will help you to check if the router needs to be update or not. Then click the Update button
and proceed to firmware update process. This will cause the router to reboot in a few seconds. When all the
loading process is completed, log in to the web user interface again. You will see the firmware version is up to
date.
Dynalink WebGUI
Check the current firmware version
Update to the latest firmware version
To Next Page
Loading...
