DynalinkXDL-WRX36 | FAQ & Troubleshooting
23
Why I cannot connect my IoT device to Dynalink WiFi?
1. If you are not using latest firmware version. Please upgrade to the latest firmware. The latest firmware version
has a fix for IoT compatibility issue.
2. Some IoT devices that use WPS only cannot handle WiFi SSID or WiFi password that consists with special
characters such as “.”, “-”, “_”. However, Dynalink WiFi’s default SSID does contain some special characters.
If IoT devices cannot connect to Dynalink WiFi. Please change the Dynalink WiFi and SSID to consist of only
English letters and numbers and try again.
Can I use WiFi extender with Dynalink WiFi?
The answer in the latest version is certain, but you need to disable LAN Security via WebGUI. Please refer to
user guide for detail of LAN Security setting. For bridge that use Ethernet to connect to Dynalink WiFi, it should
work without any configuration change.
To Next Page
Loading...
