DynalinkXDL-WRX36 | FAQ & Troubleshooting
55
III. WiFi Connectivity
Cannot find the 2.4/5GHz WiFi network
If you cannot see your router’s SSID when scanning the available WiFi networks, try the following solutions:
1. Start the scan closer to the router.
2. It is recommended to upgrade the WiFi driver of your device to the latest version.
3. Disable and on the WiFi function on your device; refresh the scanning list of available WiFi networks.
4. Reboot the router: reboot the router from WebGUI/APP, or unplug the power connector from the router and
plug it back.
5. Reboot your device.
If you still cannot find the SSID to establish a wireless connection to the router, try to reset your router back to
factory default settings. Then repeat the connection process as described in 4. Configure your Router.
How to fix the computer's wireless network card cannot find the wireless signal?
If you use the Intel ® wireless interface card in the list below, please update your driver to the latest version, and
then you can correct some Intel ® wireless cards because of the driver. The problem caused the inability to connect
to the 802.11ax router normally.
To Next Page
Loading...
