DynalinkXDL-WRX36 | FAQ & Troubleshooting
25
What if my mobile phone and other IoT devices work fine with Dynalink Router,
but my laptop cannot connect?
Some certain Intel laptops using Intel WiFi 5 adapters are known to have interoperability issues with WiFi 6. You
can go to below Intel website to check and download the driver.
https://www.intel.com/content/www/us/en/support/articles/000054799/wireless.html
Please note these driver update is not part of windows update, so you need to do this manually.
Why I cannot use login.dynalink to login to Dynalink WebGUI from my PC? But
192.168.216.1(default Router IP) can work?
Dynalink Router listens to IPv4 DNS query from your PC. When it detects login.dynalink, it will return its own IPv4
address (192.168.216.1 or new Router IP changed by user), so your PC know where to direct the WebGUI
requests. However, if you have manually set up remote DNS server on your PC/laptop, such as Google DNS or
Cloudflare DNS, then Dynalink Router will not detect the DNS request. Therefore, your PC/laptop cannot connect
to Dynalink Router.
My mobile phone is already connected to Dynalink Router, why Dynalink APP said
it cannot find Dynalink Router?
Dynalink APP user login.dynalink DNS requests to find Dynalink Router. Please check if you manually set up
remote DNS server (Google DNS or CLoudflare) on your mobile phone. If you do, please change DNS setting
back to default (auto), or manually add Dynalink Router (default LAN IP 192.168.216.1) as one of DNS server.
Does Dynalink Router support Bridge mode?
No, Dynalink Router does not support bridge mode at this moment.
To Next Page
Loading...
