Dynalink DL-WRX36 - How to Set up Openvpn Server on the Dynalink Router

DynalinkXDL-WRX36 | FAQ & Troubleshooting
36
How to set up OpenVPN Server on the Dynalink Router?
1. Login with the username and password you set up for your router account via WebGUI. By default, your user
name is admin and password prints on the label on the bottom of Dynalink Router.
2. Go to Security > VPN > OPENVPNSERVER and enable it.
3. If you only want to access Dynalink home VPN for certain service, go ahead to Export the OpenVPN
Configuration to file (client.ovpn) directly. If you want to route all your Internet traffic through VPN (e.g., to get
around some Internet blocking) mechanism), then you need to select the Advanced Settings and select
Internet and local network, then export the Open VPN configuration file. (client.ovpn)