DynalinkXDL-WRX36 | FAQ & Troubleshooting
37
4. Modify your ovpn file manually to update your correct IP address. Use a wordpad to open the exported
client.ovpn file, you will see the first few lines like below.
client
dev tun
proto udp
remote 192.168.1.10 1194
float
keepalive 10 20
auth-user-pass
ns-cert-type server
comp-lzo adaptive
reneg-sec 3600
The 192.168.1.10 is Dynalink Router’s WAN IP address assigned by your cable/DSL modem, but not
necessarily the Public IP address that can reach your Router. Use Google to find out your real IP address as
below.
To Next Page
Loading...
