DynalinkXDL-WRX36 | FAQ & Troubleshooting
34
Does Dynalink WiFi support Comcast Xfinity Internet?
Yes, Dynalink WiFi can work with Comcast Xfinity Internet service. You do not need to change any setting on the
Xfinity modem. For Dynalink WiFi, use default WAN setting (DHCP). Simply use the Ethernet to connect Dynalink
WiFi’s WAN port to one of Xfinity modem’s LAN port, then you can start to enjoy Xfinity Internet with Dynalink WiFi.
How to set up PPTP VPN client on Dynalink Router?
1. After you set up the PPTP VPN server, you should know the VPN server's IP address, username and
password, etc. related configuration information
2. Go to WebGUI and see Security > VPN > VPN client, select VPN type to PPTP.
3. Enter Username and password. If you would like to get all Internet traffic to go through VPN, please select
Yes on Enable Default Router. Hit Apply when finished. You can also add some description for your own
reference.
4. After you finished the PPTP VPN client set up and apply the setting. You will see this VPN client setup below.
Just click the Activate and you can activate this VPN tunnel.
To Next Page
Loading...
