DynalinkXDL-WRX36 | FAQ & Troubleshooting
64
1. Have you thought of changing your network frequency band to enjoy a faster connection? Your router is dual-
band (2.4 & 5GHz), so you will likely get better speed by switching to the 5GHz band instead of the more
commonly used and congested 2.4GHz band. Make sure your 5GHz WiFi is active at Network > WiFi in the
router’s WebGUI, and connect your WiFi device or computer to the 5GHz band instead of 2.4GHz.
2. If you can access to the Internet, but feel the throughput is lower than expected and delay is longer than
expected. You can try to change the WAN MTU to smaller size. Most ISP use some kind of IPv4/v6 tunneling,
so if you use 1500 size IPv4 packet, the packet will be fragmented and cause lower performance. For TMO,
Verizon and ATT 5G/LTE home network, we suggest to use WAN DHCP MTU=1420. For other ISP, please
check with your ISP or search for posting on the Internet.
VI. Security
Network security
It is highly recommended to create a unique password for your router. You can change the default WiFi password,
as well as using Dynalink APP or WebGUI login password at Network > WiFi and System Settings > Password
To Next Page
Loading...
