DynalinkXDL-WRX36 | FAQ & Troubleshooting
28
2. Nintendo Switch does not support full 5GHz channels. In Dynalink Router default Auto Channel mode, Dynalink
Router might select a 5GHz channel that the Nintendo Switch does not support. In this case, you can use
WebGUI via PC to manually change it or the “Advance setting” on Dynalink APP to redirect to Dynalink Router’s
WebGUI. Please go to WebGUI > Network > WiFi > Radio, switch the frequency to 5GHz, to select a channel
between 36~52. Below is an example on the WebGUI.
Dynalink APP
Dynalink WebGUI
To Next Page
Loading...
