DynalinkXDL-WRX36 | FAQ & Troubleshooting
39
6. Your Dynalink Router connects to a modem in most cases. Please check if your modem has integrated
Firewall/VPN/Router function. If yes, please set up your Dynalink Router WAN IP address as DMZ IP address
for your modem. Therefore, the incoming VPN traffic sends to Dynalink Router and not be blocked by your
modem.
7. Set up your VPN client on the Windows PC. Visit https://openvpn.net/client-connect-vpn-for-windows/ and
download and install open VPN Window client.
8. From the open VPN client, first import the OpenVPN configuration file (client.ovpn) you just edited. Enter the
user name and password in step5, then you can connect to Dynalink Router via OpenVPN.
To Next Page
Loading...
