Dynapac CA 301 - LUBRICANTS AND SYMBOLS

3CA 251/301 M251EN2
SMÖRJMEDEL, SYMBOLERLUBRICANTS AND SYMBOLS
Always use high-quality lubricants in the
amounts recommended. Too much grease or
oil can cause overheating and subsequent
increased wear.
CAUTION
CAUTION
ENGINE OIL, ambient temp. Shell Rimula SAE 15W/40 or equivalent.
-10°C to +50°C (14°F to 122°F) API Service CD/SE, CD/SF
HYDRAULIC FLUID, ambient temp.
-10°C to +40°C (14°F to 104°F) Shell Tellus Oil TX68 or equivalent
above +40°C (+104°F) Shell Tellus Oil T100 or equivalent
TRANSMISSION OIL, ambient temp.
-15°C to +40°C (5°F to 104°F) Shell Spirax SAE 80W/90, HD API, GL-5
above +40°C (+104°F) Shell Spirax HD85W/140 or equivalent
DRUM OIL/CASSETTE OIL
All temperatures Synthetic oil, MOBIL SHC 629 or equivalent
GREASE Shell Calithia EPT2 or equivalent
FUEL See engine manual
COOLANT Shell Anti Freeze 402 or equivalent.
50/50 mixture with water Freeze safe down to about -35°C (-31°F).
Engine oil level Air cleaner
Engine oil filter Battery
Hydraulic reservoir level Tyre pressure
Hydraulic fluid filter Sprinkler
Transmission oil level Sprinkler water
Lubricating oil Coolant level
Fuel filter Recyclable
Other lubricants are required for operation in
extremely high or extremely low ambient
temperature. See, chapter ”Special
instructions”, or get in touch with Dynapac.
50
/
50