Dynapac CA 301 - SPECIFICATIONS

4 CA 251/301 M251EN2
SPECIFICATIONS
Std D PD A Std D PD
Weight CECE,
standard equipped roller, kg (lbs) 9550 9750 11150 10000 11350 12050 11900
(21,060) (21,500) (24,590) (22,050) (25,030) (26,570) (26,240)
Length, std. equipped roller, mm (in) 5380 5380 5450 5532 5380 5430 5450
(212) (212) (215) (218) (212) (214) (215)
Width, std. equipped roller, mm (in) 2373 2373 2373 2373 2373 2373 2373
(93) (93) (93) (93) (93) (93) (93)
Height, std. equipped roller, mm (in) 2175 2175 2230 2175 2180 2180 2230
(86) (86) (88) (86) (86) (86) (88)
Height, " with ROPS, mm (in) 2895 2895 2945 2895 2900 2900 2945
(114) (114) (116) (114) (114) (114) (116)
Height, " with cab, mm (in) 2800 2800 2850 2800 2800 2800 2850
(110) (110) (112) (110) (110) (110) (112)
Weight and sizes CA 251 CA 301
Fluid volumes Litres (gal or qts)
Rear axle:
• Differential ...................................12 (12.7 qts)
• Planetary gears ...........................3,1 (3.3 qts)/each side
Pump drive/Transfer gearing .........1,5 (1.6 qts)
Drum drive/Torque hubs (D,PD)....2,8 (3.0 qts)
Drum, vibrator................................(A) 27 (7.1 gal)/each side, 2,7 (2.85 qts)/each side (cassette)
Hydraulic reservoir ........................90 (24 gal)
Hydraulic system ...........................(Std, A) 26 (6.9 gal), (D, PD) 25 (6.6 gal)
Diesel engine.................................(Deutz) 14 (14.8 qts), (Cummins) 16 (16.9 qts)
Coolant (Cummins) .......................27 (7.1 gal)
Fuel tank........................................265 (70 gal)
Water tank (A) ...............................480 (127 gal)
Emulsion tank (A) ..........................10 (10.6 qts)
Electrical system
Battery .............................12 V, 160/170 Ah
Alternator .........................12 V, 95/105 A
Fuses...............................8 A