10 CA 251/301 M251EN2
Brakes - Test
EVERY 10 HOURS OF OPERATION (Daily)
11
24
10
Fig. 2 Radiator
1. Filler cap
Check operation of the brakes as follows:
1. Drive the roller slowly forward.
2. Press the emergency stop knob (11). The brake
warning lamp (10) should light and the roller should
stop.
3. On completion of the test, put the forward/reverse
control (24) in neutral before resetting the
emergency stop.
4. Pull the emergency knob out.
Fig. 4 Instrument panel
10. Brake warning lamp
11. Emergency stop
24. Forward/reverse lever
CUMMINS:
At operating temperature the coolant is
under pressure. If the cap is opened too
quickly, steam will escape with the risk of
severe scalding. Wear protective gloves
and goggles.
Use steps or other suitable aid when checking
the radiator.
See the engine manual. See specification for filling with
coolant.
Change the coolant and flush out the system
every other year. Check also that air can flow
freely through the radiator.
Coolant level, checking
- filling
Air circulation - Checking
Fig. 3 Cooling grille
1
Ensure that circulation to the engine through the grille
is not obstructed.
WARNING
CAUTION
CAUTION
WARNING
To Next Page
Loading...
