9CA 251/301 M251EN2
MAINTENANCE MEASURES
Item in Procedure See Comments
fig. 1 page
20 Change engine oil, Cummins See engine manual
10 Change engine oil filter, Cummins See engine manual
20 Clean engine cooling fins, DEUTZ See engine manual
20,16 Check V-belt monitoring, DEUTZ See engine manual
Check belt tension on fan and alternator See engine manual
22 Check oil level in rear axle/planetary gear 19
33,37 Check oil level in drum/cassettes 19, 20
1 Check oil level in torque hubs (D and PD only) 20
18,21 Check bolted joints 21
29 Check oil level in transfer gearbox 21
31 Check rubber elements 21
Every 250 hours of operation (Monthly)
Every 500 hours of operation (Every three months)
Item in Procedure See Comments
fig. 1 page
8 Change the hydraulic fluid filters 22
11 Lubricate controls and pivots 23
14,28 Clean outside of hydraulic fluid cooler 23
20 Change engine oil, DEUTZ See engine manual
10 Change engine oil filter, DEUTZ See engine manual
Check engine valve clearance See engine manual
Every 1000 hours of operation (Every six months)
Item in Procedure See Comments
fig. 1 page
26 Drain condense water from hydraulic reservoir 24
19 Drain condense water from fuel tank 24
6 Change venting filter on hydraulic reservoir 24
9 Change main filter of air cleaner 25
15 Clean strainer of feed pump, DEUTZ See engine manual
Item in Procedure See Comments
fig. 1 page
26 Change fluid in hydraulic reservoir 26
29 Change oil in transfer gearbox 26
2,37 Change oil in drum/cassettes 26, 27
1 Change oil in the torque hubs (D and PD only) 27
22 Change oil in rear axle planetary gears 28
22 Change oil in rear axle differential 28
36 Clean the water tank (CA 251A) 29
38 Clean the emulsion tank (CA 251A) 29
Every 2000 hours of operation (Yearly)
To Next Page
Loading...
