8 CA 251/301 M251EN2
The periodic measures shall be performed in the first
case at the number of operating hours stated, in the
second case for the period stated, ie, daily, weekly, etc.
Always clean away dirt before filling or
checking any oil, hydraulic fluid or fuel, and
before lubricating with grease or oil.
Instructions in the engine manufacturer’s
manual also apply.
CAUTION
MAINTENANCE MEASURES
Item in Procedure See Comments
fig. 1 page
Before starting each day
20 Check level of engine oil See engine manual
13 Check coolant level, Cummins 10
Check the brakes 10
25,34 Check scraper setting 11, 12
40 Check/top up wind shield liquid 12
27,35 Check sprinkler system (CA 251A) 14
On completion of day´s work
7 Check level of hydraulic reservoir 12
17 Refuel 13
38 Fill the emulsion tank (CA 251A) 13
36 Fill water tank (CA 251A) 14
Every 10 hours of operation (Daily)
Item in Procedure See Comments
fig. 1 page
10 Change engine oil and oil filter See engine manual
9 Clean air cleaner insert or change main filter 15
Ensure that hoses and connections are tight
24 Check tire pressure 15
4 Check the battery 16
31 Lubricate steering joint 17
30 Lubricate the steering cylinder brackets 17
39 Lubricate the levelling blade mechanism 18
1 Change oil in torque hubs (D and PD only) 27
Every 50 hours of operation (Weekly)
After the first 50 hours of operation, change all oil
and hydraulic fluid filters and lubricating oil, but
not the hydraulic fluid.
CAUTION
CAUTION
To Next Page
Loading...
