Dynapac CP1200 - Technical Specifications

Technical specifications
8 4812325556EN 2017-11-22
Technical Specifications
Vibrations – Operator station (ISO 2631)
The vibration levels are measured according to the operational cycle described in the EU
directive 2000/14/EC on machines equipped for the EU market with the operator’s seat in the
transport position.
The measured vibrations on the whole body are below the 0.5 m/s² action value, as specified in the
directive 2002/44/CE (the limit is 1.15 m/s²).
The measured vibrations on the hand/arm are also below the 2.5 m/s² action value, as specified in the
same abovementioned directive (the limit is 5 m/s²).
Noise level
The sound levels are measured according to the operational cycle described in the EU directive
2000/14/EC on machines equipped for the EU market with the operator’s seat in the transport
position.
Guaranteed sound power level, L
wA
101 dB (A)
Sound pressure level at the operator's ear (platform), L
pA
85 ±3 dB (A)
Sound pressure level at the operator's ear (cab), L
pA
80 ±3 dB (A)
During normal operations, the values abovementioned may differ, depending on the work specific
conditions.
Electrical system
The machines were tested for electromagnetic
compatibility (EMC) in accordance with EN 13309:2000:
"Construction machinery".