2017-11-22 4812325556EN 1
Introduction
CP1200
Dynapac CP1200 is a 12 tones pneumatic tire roller with
5,77 ft. (1760 mm) width.
It has 5 front wheels, and four back wheels. The flexible
ballast solution and the wide range of option equipment
indicate that the machine has different settings available.
CP1200 is mainly used together with other asphalt rollers to
seal surfaces. Thanks to its weight, it also serves as a roller
for other types of ground.
Warning symbols
WARNING! Damage to the machine or its
parts.
CAUTION! Risk of death or injures.
The Safety Manual delivered with the
machine shall be read by the operator.
Always follows the safety instructions
and keep the Manual inside the machine.
It is recommended to at least train the
operators on daily handling and
maintenance of the machine, according to
the Instruction Manual. Passengers are
not allowed on the machine, and the
operator must be on the seat whenever he
operates the equipment.
Read throughout the manual before
starting the machine and before
performing any maintenance.
Request immediately new manuals if the
old ones are lost damaged or become
illegible.
Make sure there is a good vent (air
exhaust) when the engine is turned on in
closed facilities.
To Next Page
Loading...
