EasyManua.ls Logo

Dynapac CP1200 - Page 40

Dynapac CP1200
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
36 4812325556EN 2017-11-22
Display and button set
The parking brake symbol is shown when the
parking brake is activated.
= Low speed.
= Automatic water control (AWC). The sprinkling is
activated when the forward/backward lever is in the neutral
position.
= Tire pressure.
= High/low speed mode (in the center of the screen).
= Alarm display, see the table below for information.
Alarm descriptions
SYMBOL
DESCRIPTION
FUNCTION
Warning lamp, hydraulic oil
filter
If the lamp is lit with the engine in maximum rpm, it
shall be necessary to replace the hydraulic oil filter.
Warning lamp, air filter
If the lamp is lit with the engine in maximum rpm, it
shall be necessary to clean or replace the air filter.
Warning lamp, battery
charging
If the lamp is lit with the engine running, the alternator
is not charging. Stop the engine and find the fault.
Warning lamp, engine
temperature
If the lamp is lit it means the engine is too hot. Stop
IMMEDIATELY the engine and find the fault. Refer to
the engine manual.
Warning lamp, hydraulic oil
temperature
If the lamp is lit it means the hydraulic oil is too hot. Do
not operate the roller. Cool the oil making the engine
run in idle and locate the fault.

Related product manuals