EasyManua.ls Logo

Dynapac CP1200 - Page 50

Dynapac CP1200
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Long-term storage
46 4812325556EN 2017-11-22
Hydraulic oil reservoir
Fill the hydraulic reservoir until the uppermost level.
Tires
Make sure the tires pressure is at least 345kPa (50 PSI).
Steering cylinder, hinges, etc.
Grease the steering cylinder plunger spindle to preserve it.
Also lubricate the hinges on the engine compartment and cab
doors.
Hoods, tarpaulin
Lower the instruments hood/covering over the instrument
panel.
Cover the entire roller with a tarpaulin. It shall have a gap
between it and the ground.
If possible, store the machine indoors and preferably in a place
with regular temperature.
When stopping and parking the equipment, always apply the
parking brake.
As a precaution measure, chock the roller tires when parking
on slopes and turn off the engine.
To prevent accidents, when parking on slopes,
stop transversally to the road towards the slope.
Never leave the roller with the engine running.
Before leaving it, apply the emergency/parking
brake.
Make sure the roller is parked in a safe place and
that it is not obstructing the traffic.

Related product manuals