14
LT800 ILT800EN3
THE MACHINE’S RANGE OF APPLICATIONS
Dynapac LT vibratory rammers are designed for the
compaction of fill, including also fill that contains clay.
Applications include house foundations, and bearing
courses for roads and parking areas etc.
It can be used to advantage in pipe trenches and for
compacting round posts etc.
LT rammers must only be used in well-ventilated
areas, as is the case for all combustion engine
machines.
When operating LT rammers follow the instructions in
the manual, and do not sit or hang from the machine
when it is working.
This will interfere with the machine’s functionality and
result in inferior compaction, and may also damage
the machine.
Do not lift the machine in any way when it is in
operation, and do not operate on steeper slopes than
what is recommended in this manual.
To Next Page
Loading...