Dynapac LT800 - Instructions for Lifting

17
LT800 ILT800EN3
Keep well clear of the hoisted machine.
Use only the frame lifting hook (1) for lifting the
machine.
All lifting devices must be dimensioned in order
to fullfil all regulations. Before lifting check that
ramming shoe is correctly attached and not
damaged.
The weight is noted on the machine data plate; see the
"Machine data plate" section.
Lay the machine down when switched off and
not in use.
Transport and liftning
Transport handle
Always lash the machine securely for all
transportation.
Secure the machine in the lifting hook and the
lower lifting handle.
For moving short distances, the machine can be
tilted forward so that it rests on the plastic wheels on
the handle. Lift the transport handle and roll the
machine forward or backward.
Keep your feet clear of the machine.
L000189A
INSTRUCTIONS FOR LIFTING
1
L000187B