Dynapac LT800 - Maintenance - Service Points

19
LT800 ILT800EN3
Every 10 hours of operation (daily)
Fig. 1
1. Fuel tank
2. Fuel filter
3. Air filter
4. Oil dipstick
5. Engine oil filter
6. Oil drain plug
7. Rammer oil sightglass
8. Engine throttle wire
Item in fig.1 Maintenance see page Comments
1 Check and replenish fuel 15
4 Check and replenish engine oil 21
Check for oil leakage
Check/retighten bolted joints (rammer foot) 21
3 Check air cleaner elements 21
7 Check ramming system lubrication with
sight glass 21
Item in fig.1 Maintenance see page Comments
6 Change engine oil 22
5 Clean / replace oil filter See engine manual
3 Clean / replace air cleaner elements See engine manual
Check and adjust the engine valve clearance See engine manual
7 Change oil in the eccentric element after
the first 20 hours of operation.
Change oil in the eccentric element
after the first 20 hours of operation.
The first 20 hours of operation
MAINTENANCE – SERVICE POINTS
L000193B
1
8
2
3
5
6
7
4