Dynapac LT800 - Maintenance - Service Points

20
LT800 ILT800EN3
Item in fig.1 Maintenance see page Comments
Lap intake and exhaust valves See engine manual
Replace piston rings See engine manual
7 Change ramming system oil 23
Every 1000 hours of operation
Item in fig.1 Maintenance see page Comments
6 Change engine oil 23
5 Clean / replace oil filter See engine manual
Check fuel injection pump See engine manual
Check fuel injection nozzle See engine manual
Adjust valve head clearance for intake
and exhaust valves See engine manual
2 Change fuel filter and clean the fuel tank See engine manual
Every 300 hours of operation
Item in fig.1 Maintenance see page Comments
3 Clean / replace air cleaner elements 22 See engine manual
8 Lubricate the engine throttle wire and
all control 22
Every 100 hours of operation
MAINTENANCE – SERVICE POINTS