EasyManua.ls Logo

Dynapac LT800 - Table of Contents

Dynapac LT800
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
LT800 ILT800EN3
The safety instructions are included in this
manual and must be studied by the operator.
Always follow the safety rules and keep the
manual available for future use.
Read through the entire manual before
starting any maintenance operations.
Ensure good ventilation (air extraction) if the
engine is run indoors.
WARNING: Indicates danger or hazardous
procedure that could lead to serious or mortal
injury if the warning is neglected.
CAUTION: Indicates danger or hazardous
procedure that could lead to machine or property
damage if the warning is neglected.
CONTENTS
WARNING SYMBOLS
SAFETY INSTRUCTIONS
CALIFORNIA
Proposition 65 Warning
Diesel engine exhaust and some of its
constituents are known to the State of
California to cause cancer, birth defects,
and other reproductive harm.
Page
General ............................................................................ 3
Machine plate .................................................................. 3
CE marking and Declaration of conformity ................... 4
Safety instructions (For all Light products) ................. 5-7
Safety decals, location/description ........................... 8, 9
Fuel and lubricants ........................................................ 10
Technical data.......................................................... 11-12
Technical data - Dimensions ........................................ 13
The machine's range of applications ........................... 14
Operation ................................................................ 15, 16
Instructions for lifting ...................................................... 17
Long time storage ......................................................... 18
Maintenance – Service points ................................ 19, 20
Maintenance – Every 10 hours of operation ............... 21
Maintenance – Every 100 hours of operation ............. 22
Maintenance – Every 300 hours of operation ............. 23
Maintenance – Every 1000 hours of operation ........... 23
Troubleshooting ............................................................ 24