23
LT800 ILT800EN3
1. Change oil (first change after 20 hours, together
with engine oil filter).
2. Replace oil filter (see engine manual).
3. Replace fuel filter and clean the fuel tank
(see engine manual).
1. Lap intake and exhaust valves (See engine
manual).
2. Replace piston rings (See engine manual).
3. Change oil in the eccentric system. Screw out the
drain plug (1) and empty the oil into a receptacle.
Save the oil in a can and dispose of it properly.
4. Refit the plug tight, making sure that the rubber seal
is undamaged.
5. Remove the sight glass (2) and fill with fresh oil as
follows. Refit the sight glass and tighten firmly. The
oil level should be at the middle of the sight glass.
2
1
1. Oil drain plug
2. Sight glass
L000172A
1. Oil dipstick
2. Oil drain plug
1
2
L000197A
MAINTENANCE – EVERY 300 HOURS OF OPERATION
MAINTENANCE – EVERY 1000 HOURS OF OPERATION
To Next Page
Loading...