Dynapac LT800 - Long Time Storage

18
LT800 ILT800EN3
1. Clean the machinery. Remove mud and dirt from
the ramming shoe.
2. Clean the air cleaner.
3. Drain all fuel from the fuel tank and carbu-
retor. Collect the contents in a receptacle
and dispose of it properly.
4. Pull the starter grip lightly until pressure is felt.
5. Clean up oil and dust accumulation on rubber parts.
6. Apply a light coat of oil on the ramming shoe to
prevent rust formation.
7. Put the cover entirely on the machine, and store the
machine in dry, dust-free area.
L000196A
LONG TIME STORAGE