Dynascan DS421LT4 User Manual

DS421LT4 User Manual 31
ITEM
DESCRIPTION
IR Control
Enable/disable the remote control for Menu.
Note: When disabled, the remote control function can be enabled again
from the control panel on the display or through the DynaScan “Display
Manager” application.
Power Off Mode
When in Power Off Mode, RS-232 controls do not function. Only [Main
Power Switch] on the display or [Power Button] on the remote control can
wake up the display.
Reset to Factory
Default
Restore all settings to default.
Note: It does not modify CURRENT TIME, POWER ON TIME and POWER
OFF TIME.
Apply
Save the system for the changes to take effect.
Cancel
Exit the system without saving any changes.

Dynascan DS421LT4 Specifications

General

Brand	Dynascan
Model	DS421LT4
Category	Monitor
Language	English