Why is my Dynascan Monitor remote control not working?
If the remote control for your Dynascan Monitor isn't working, first ensure that batteries are installed. If batteries are present, verify their freshness and correct polarity. Also, make sure you are within the remote's operational range. Finally, bright light sources like fluorescent or neon lights can interfere with the remote; avoid using it near such lighting.
What to do if no input image is displayed on Dynascan Monitor?
If no image is displayed on your Dynascan Monitor, ensure the cable is fully plugged in and is not damaged or excessively bent. Check that the main power switch is ON and the power cord is securely connected. Verify that the image source resolution matches the supported format.
Why is auto on/off not working on my Dynascan DS551DR4?
If the auto on/off function on your Dynascan Monitor isn't working correctly, check that the TIMER setting in the menu is not set to 'OFF'. Also, verify that the 'Power On Time' and 'Power Off Time' settings are configured correctly.
What to do if nothing happens when switching on the main switch of Dynascan Monitor?
If nothing happens when you switch on the main switch of your Dynascan Monitor, unplug the power cord from the socket, wait a few seconds, and then plug it back in to reset the device.
General| Screen Size | 55 inches |
|---|---|
| Resolution | 3840 x 2160 (4K UHD) |
| Viewing Angle | 178°/178° |
| Panel Type | IPS |
| Response Time | 8 ms |
| Display Type | LCD |
| Refresh Rate | 60 Hz |
| Connectivity | HDMI, DisplayPort |
| Input Connectors | HDMI, DisplayPort, USB, VGA |
To Next Page
