DS47LT3, LT4 User Manual 11
Installation Location
z The ceiling or the wall must have enough strength to support the LCD and its accessories.
z Do not install in a location with strong vibrations or is dusty.
z Do not install near the building’s main electric panel.
z Do not install at a location where the LCD can be easily removed by the general public.
z When installed in an alcove, leave at least 10cm (4”) of space around the LCD to ensure proper ventilation.
When hanging from a ceiling
z Ensure that the ceiling is strong enough to support the LCD and it accessories. Also consider the effects of
earthquake, unexpected vibration, and other external forces when evaluating the ceiling strength.
z The LCD should be secured to the building’s structural frame, such as a beam, and not to materials such as light
steel frame or interior decoration.
z Do not use wood screws or dry wall anchors for installation.
Maintenance
z Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective
measures when a problem is identified. Neglecting the problem may worsen the situation.
z Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems
do not occur again.
10 cm / 4 in
10 cm / 4 in
To Next Page
Loading...
Need help?
General
