Dynascan P-72 - 6.4.- Microphone Features; 6.5.- Definable Keys Programming

English - 16 -
(4) Microphone (MIC):
● Speak towards the microphone in a normal, clear tone of voice.
(5) Led indicator:
● When transmit, the led indicator lights red.
● If operating on speaker microphone keypad, the led indicator lights red, once release, the led turn
OFF.
(6) PF1 [A/B] key:
● The function is the sane that the [PTT/CLR] of the front panel of the transceiver. It is also
definable MIC PF1 key by programing software.
(7) PF2 [MENU] key:
● For selecting the menu mode. It is also definable MIC PF2 key by programing software.
(8) PF3 [VFO] key:
● For selecting the VFO mode. It is also definable MIC PF3 key by programing software.
(9) PF4 [DEL] key:
● Same function as [B/E] key on front panel of the transceiver. It is also definable MIC PF4 key by
programing software.
(10) [UP] key:
● Increase the parameter value.
(11) [DWN] key:
● Decrease the parameter value.
6.5.- DEFINABLE KEYS ON SPEAKER-MICROPHONE:
There are 4 PF definable functions keys: [MICPF1], [MICPF2], [MICPF3] and [MICPF4], whose
functions can be programmed by following procedure:
1. Press the [MENU] knob to enter the settings menu.
2. Rotate the [MENU] knob to select the “SET” option. Then press the [MENU] knob to confirm.
3. Rotate the [MENU] knob to select “Definable set” option. Then press the [MENU] knob to
confirm.
4. Turn the [MENU] knob to select the desired definable keys. Then press the [MENU] knob to
confirm.
5. Turn the [MENU] knob to assign the function for the selected definable key. Then press the
[MENU] knob to confirm.