Dynascan P-72 - 8.3.- Channel Naming; 8.4.- Character Input from Microphone Keypad

English - 25 -
Main
menu
Menu
no.
First
menu
Second
menu
Third menu
Selections
Default
FM
Radio
1
FM radio
frequency
---
---
---
---
Scan
1
List
Check
Scan List
Set PrioCH
---
---
Disable
PrioCH
---
---
Delete CH
---
---
Add CH
---
---
2
Scan
Mode
CO
---
---
---
TO
---
5/10/15/20
seconds
---
SE
---
---
---
3
List Scan
Start scan
---
---
---
4
Freq Scan
Start scan
---
---
---
5
Scan Off
Disable
scan
---
---
---
8.3.- CHANNEL NAMING:
1. Press and hold the [PTT/CLR] key for more than 3 seconds to select the operation band (CTRL).
2. Press the [VFO/MR] key to select the current band to channel mode.
3. Press and hold the [VFO/MR] key for 3 seconds to access to channel naming mode.
● Press the [#] key on microphone to switch the character input type.
● Character input type icon will displayed on the right of the current editable band.
● AB (for capital letter) / ab (for lowercase letter) / 12 (for numeric 0 ~ 9).
4. Rotate the [MENU] knob to select the desired character input type.
● You can enter the following characters for the channel name: 0 ~ 9, A ~ Z, a ~ z ...
● Press the [SQL/MONI] key to move left the cursor; and move right by press the [TONE/T.SET]
key.
● To delete a prior character, press the [B/E] key.
5. Once program completed, press the [MENU] knob to confirm and exit the current editing mode.
6. Or press the [B/E] key to cancel the program and exit the editing mode.
8.4.- CHARACTER INPUT FROM MICROPHONE KEYPAD:
You can enter the characters using the microphone keypad as shown in the following table.
Key
Character display (for every press of the key)
1
0
,
´
…
1
2
A
B
C
2
3
D
E
F
3
4
G
H
I
4
5
J
K
L
5
6
M
N
O
6
7
P
Q
R
S
7
8
T
U
V
8
9
W
X
Y
Z
9
0
Blank space
0