Dynaudio Sub 6 User Manual

Introduction
Dear music lover
Welcome to Dynaudio Sub 6 active DSP subwoofer.
The Sub 6 is a very high performance product that rewards thoughtful setup and installation so we suggest that
you take a little time to read this manual before you begin.
We’ve been designing, engineering and creating speakers at our Denmark headquarters since 1977, and ever
since we started we’ve been pouring advanced R&D technology into every model. What comes out is audio
reproduction at the highest level, making listening to even the most familiar recordings a new listening experience
altogether. Our aim: to reproduce exactly what was happening in the studio at the time of the original recording.
In fact, we’re one of very few companies who can realise such concepts. That’s thanks to Dynaudio Labs, our in-
house development and production facility. It’s so advanced, in fact, that we’ve been given TS16949 certification.
Each loudspeaker is constructed and rigorously tested by our master-craftsmen to these incredibly demanding
standards.
If you want to get the best possible performance from them (that’s why you bought Dynaudio in the first place,
after all), take a look at the information on the following pages. By considering our tips and suggestions, you’ll be
recreating what our engineers do in our testing rooms: extracting every ounce of detail and nuance in the music…
and then enjoying every second of it.
We wish you many years of enjoyment with your new subwoofer.
Dynaudio
Introduction 9

Dynaudio Sub 6 Specifications

General

Subwoofer type	Active subwoofer
Number of subwoofers	2
Subwoofer peak power	500 W
Subwoofer driver diameter	240 mm
Subwoofer frequency range	16 - 230 Hz
On/off switch	Yes
Product color	Black
Speaker enclosure	Closed
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W

Weight and Dimensions

Subwoofer depth	268 mm
Subwoofer width	447 mm
Subwoofer height	300 mm
Subwoofer weight	21500 g