Connection
Slow blinking in red
There is no active transmitter (Hub, Connect, mobile device…) / master, or a connection is not possible.
Search
Fast blinking in blue for 20 min
Searching for an active input.
Synchronisation / Connection
Fast blinking in red for 10 s
System synchronization during no transmitter (Hub, Connect, mobile device…) / master connection.
Synchronisation / Connection
Blue LED is turned o for 0.2 s
New transmitter (Hub, Connect, mobile device…) ID, transmitter input, or a direct input is selected.
Synchronisation / Connection
Illuminated in red for 5 s
Status LEDs on the front 19
To Next Page
Loading...
