What to do if there's no sound from one of the speakers on my Dynex DX-46L262A12 LCD TV?
Adjust the audio balance settings on your Dynex LCD TV. Also, make sure that the audio cables are connected correctly and securely to the back of your TV.
How to fix a Dynex DX-46L262A12 remote that's not working?
First, ensure the power cord is correctly connected to both your Dynex LCD TV and the power outlet. Then, check for any obstructions between the remote and the TV's remote control sensor. Point the remote directly at the sensor. Make sure the batteries are installed correctly or replace them with new ones.
Why are there no channels after the auto channel search on my Dynex DX-46L262A12?
Keep in mind that reception can vary by channel depending on the broadcast power level of a given station. Make sure the antenna or cable/satellite TV is connected securely to your Dynex LCD TV. You might also want to try replacing the cable between the antenna/cable or cable/satellite box and your TV.
How to remove black bars around the picture on my Dynex DX-46L262A12 LCD TV?
Change the aspect ratio setting on your Dynex LCD TV.
How to fix a 'no signal' error message on my Dynex DX-46L262A12 LCD TV?
Press the INPUT button on your Dynex LCD TV remote and ensure you've selected the correct input for the device or service you're trying to use. If you're using a cable or satellite box, use the remote that came with the box to change channels.
What to do if my Dynex LCD TV has a dark, poor, or no picture but the sound is good?
Try changing channels to see if the issue is station-related. Ensure the antenna or cable TV is connected correctly and securely to your Dynex LCD TV. Make sure the 'Audio Only' option is set to 'Off'. Adjust the brightness and make sure the correct picture mode is selected. If using an antenna, the digital channel signal may be low; adjust the antenna or use a directional outdoor antenna or set-top antenna with an amplifier. Check that the video cables are securely connected and, if necessary, try a new set of video cables.
Why does my Dynex DX-46L262A12 LCD TV have no color or the color is not correct?
Try changing to another channel to rule out station-specific issues. Adjust the color saturation settings on your Dynex LCD TV. Make sure the video cables are connected correctly and securely to the back of your TV. Also, ensure the antenna or cable TV connection is secure. If you're using an antenna, the digital channel signal may be weak. Try adjusting the antenna or using a highly directional outdoor antenna or a set-top antenna with a built-in amplifier.
Why is picture quality on my Dynex DX-46L262A12 good on some channels but poor on others?
A poor or weak signal from the broadcaster or cable TV provider may be the reason. If you're connected to cable or satellite TV without a set-top box, consider installing one to improve signal reception and picture quality. Contact your cable or satellite TV provider about upgrading to a set-top box.
What to do if my Dynex DX-46L262A12 LCD TV has no picture and no sound?
First, press the power button on the TV or the remote control. Make sure the power cord is plugged in securely. Check that the correct video input source is selected. Also, ensure the antenna or cable TV is connected correctly and securely. Try another channel to rule out station problems. Adjust the contrast and brightness. Finally, make sure the incoming signal is compatible and check the closed caption settings.
What to do if control buttons on Dynex LCD TV do not work?
If the control buttons on your Dynex LCD TV do not work, ensure that the Button Lock option is set to NO. If that doesn't work, unplug the power cord, wait a few seconds, then plug it back in and turn on the TV.
General| Screen Size | 46 inches |
|---|---|
| Resolution | 1920 x 1080 |
| Display Type | LCD |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Contrast Ratio | 5000:1 |
| Brightness | 450 cd/m² |
| Audio Output | 10W x 2 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Built-in Tuner | ATSC/NTSC |
| Inputs | Component, Composite |
Safety tips for using TVs and furniture safely, preventing tip-overs.
Guidelines for safely mounting your TV to a wall, emphasizing proper hardware.
Covers electric shock, lightning, power lines, and general handling precautions.
Precautions for safely handling the TV's glass screen and liquid crystal panel.
Guidance on using specified replacement parts and referring service to qualified personnel.
Conditions under which the TV requires professional servicing and safety precautions.
Instructions for grounding outdoor antennas to protect against surges and static.
Notes on condensation, mobile phone interference, and product disposal.
Step-by-step guide for attaching the TV stand to the unit.
Instructions for mounting the TV to a wall using a compatible bracket.
Lists items included in the TV box such as remote, stand, and cables.
Identifies and describes the function of the remote sensor and power indicator.
Details the various ports on the side of the TV for connecting devices.
Explains the function of each button on the TV's remote control.
Guide to selecting the best connection type (HDMI, Component, Composite).
How to connect the TV's AC power cord to an outlet.
Steps for connecting cable/satellite boxes via HDMI, DVI, Component, Composite, Coaxial.
How to connect devices using HDMI or DVI cables for best quality.
Instructions for connecting devices using component video cables.
Steps for connecting devices using composite video cables (AV).
How to connect a VCR using composite video cables.
Guide for connecting gaming consoles or camcorders via composite cables.
How to connect a USB drive to view photos and other media.
Instructions for connecting audio systems using digital coaxial cables.
Steps for inserting batteries into the remote control.
How to properly aim the remote control at the TV's sensor.
Guide for the initial setup process using the Setup Wizard.
How to switch between different connected devices and inputs.
Explanation of how to navigate and use the TV's on-screen menus.
General instructions on using the MENU, ENTER, and arrow buttons.
Methods for changing channels using number buttons, CH+/CH-, or channel list.
How to increase, decrease, or mute the TV's sound.
Options for customizing picture settings like mode, contrast, brightness, and color.
Details on Vivid, Standard, Energy Saving, and Custom picture modes.
How to change sound modes, treble, bass, balance, and auto volume.
Explanation of Standard, News, Music, Movie, and Custom sound modes.
How to disable the picture and listen to audio only.
How to scan for and store available TV channels.
Method to hide channels from the channel list to skip them.
Creating a custom list of preferred channels for easier tuning.
How to access and tune to channels from the favorite list.
Assigning custom names to channels for easier identification.
How to check the signal quality for digital channels.
Process for setting or modifying the parental control password.
How to set ratings to block specific TV and movie content.
Explanation of US TV rating categories and their meanings.
Explanation of MPAA movie rating categories and their meanings.
Explanation of Canadian English rating categories and their meanings.
Explanation of Canadian French rating categories and their meanings.
How to block TV programs that do not have a rating signal.
Securing the TV's physical buttons to prevent unauthorized use.
Process for downloading advanced V-Chip ratings for digital channels.
How to enable or disable closed captions (subtitles) for programs.
Choosing different modes for analog and digital closed captions.
Options for setting analog captions like CC1-CC4 and Text1-Text4.
Options for setting digital captions like CC1-CC4 and CS1-CS6.
Adjusting font style, size, color, and background for digital captions.
How to manually or automatically set the TV's date and time.
Configuring the TV to turn off automatically after a set period.
Changing the on-screen display language to English, French, or Spanish.
Assigning custom labels to video input sources for easy identification.
How to view TV model name and firmware version.
Resetting all TV settings (except password) to factory defaults.
Steps to select USB as the input source to view media.
Navigating and viewing JPEG photos from a connected USB drive.
Accessing photos previously marked as favorites.
Displaying photos from a USB drive in an automated slideshow.
Adjusting repeat, shuffle, speed, and transition effects for slideshows.
Instructions for safely cleaning the TV screen and surfaces.
Guidance on when and how to contact authorized service personnel.
Solutions for picture issues like black bars, no picture, or incorrect color.
Solutions for issues related to no sound, poor audio quality, or speaker problems.
Solutions for static noise on screen or horizontal/vertical stripes.
Troubleshooting tips for double images or bright/dark spots on the screen.
Solutions for when the remote control is not working or needs programming.
Solutions for issues like no power, 'no signal' message, or lost password.
Details on the product's warranty period and coverage.
Technical details on supported inputs, outputs, and resolutions.
Technical specs for screen size, type, resolution, and audio output.
Information on power consumption, languages, and VESA mount.
Statement regarding compliance with FCC rules for digital devices.
Information on cable requirements and Dolby/HDMI trademarks.
Defines terms used in the warranty statement, like 'Product' and 'Warranty Period'.
Instructions on how to get service or repair for the product.
List of conditions and damages not covered by the limited warranty.
Legal disclaimers, limitations of liability, and contact information.
To Next Page