E-FLITE Blade CP Pro - Idle.up.throttle.curve.midpoint.adjustment.knob.description.and.adjustment

27
Idle Up Throttle Curve Midpoint Adjustment Knob Description and Adjustment
The transmitter included with your Blade™ CP Pro is equipped with an “Idle Up Throttle Curve Midpoint Adjustment”
knob (labeled as “Idle Up TCM ADJ”) on the top left panel, just ahead of the “Trainer” switch.
This knob allows you to adjust the midpoint value of the throttle curve when in the Idle Up/Stunt flight mode, from
approximately 50% power to 100% power. It has no affect on the throttle curve in the Normal flight mode, or on
the endpoints of the throttle curve in the Idle Up/Stunt flight mode.
When the knob is in the lowest, most counterclockwise position (-), the midpoint of the throttle curve in the Idle Up/
Stunt flight mode will be approximately 50%.
When the knob is in the middle position, pointing directly toward the back of the transmitter, the midpoint of the
throttle curve in the Idle Up/Stunt flight mode will be approximately 75%.