6
Safety, Precautions, and Warnings
As the user of this product you are solely responsible for operating it in manner that does not endanger yourself
and others or result in damage to the product or the property of others.
This model is controlled by a radio signal that is subject to interference from many sources outside your control.
This interference can cause momentary loss of control so it is advisable to always keep a safe distance in all
directions around your model, as this margin will help to avoid collisions or injury.
• Never operate your model with low transmitter batteries.
• Always operate your model in an open area away from cars, traffic, or people.
• Avoid operating your model in the street where injury or damage can occur.
• Never operate the model out into the street or populated areas for any reason.
• Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable
battery packs, etc.) that you use.
• Keep all chemicals, small parts and anything electrical out of the reach of children.
• Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and
protected for this purpose.
• Never lick or place any portion of your Blade™ CP Pro in your mouth as it could cause serious injury
or even death.
Additional Required Equipment
No additional equipment is required to complete your Blade CP Pro.
Blade CP Pro RTF Contents
Item Description
Not Available Separately Blade CP Pro RTF Airframe
EFLH1046 6CH CCPM Pro Transmitter FM 72MHz
EFLB0995 11.1V 800mAh 3-Cell Li-Po, JST/Balance
EFLC3105 3-Cell Li-Po Balance Charger, 0.8A
EFLH1129 Mounting Accessories & Wrench
Not Available Separately Hook and Loop Material
To Next Page
Loading...
