89
K000000000EJ 023826A0 100714
CONTEXT KEY FUNCTION
Updates the measurement.
Saves, in the memory selected in the "Select Memory" menu, the data
acquired.
Starts printing the ticket. SEE SECTION 11.
12.4 Readings→Ambient CO
It is recommended to perform the autozero in the fresh, clean air, so that the ambient CO
measurement is correct. It is advisable to turn on the instrument and wait for the autozero
completion outside the area where the test is being performed.
- The values of the ambient CO that you want to save must be acquired before saving the analyses.
- To join the values of the ambient CO to the measurements of the current analysis use the " " function.
- To print the ticket with the measurement of the ambient CO, activate the " " function
- It is possible to delete a draft value acquired by the memory by overwriting it by activating the " " function again.
- After saving the CO Test values, to carry out the combustion analysis, press the key " ".
07/08/14
10:00
Measurements
Ambient CO
CO
ppm
0
CO max
ppm
0
KEY FUNCTION
Activate the context keys shown on the display.
Returns to the previous screen.
To Next Page
Loading...
Need help?
General
