SOME OF THE STANDARD
MIDI SWITCH NUMBERS
ARE LISTED BELOW.
64 SUSTAIN SWITCH
(ON/OFF)
65 PORTAMENTO SWITCH
(ON/OFF)
66 SOSTENUTO
(CHORD HOLD,
ON/OFF)
67 SOFT PEDAL (ON/OFF)
69 HOLD PEDAL 2
(ON/OFF)
SOME OF THE STANDARD
MIDI CONTROLLER
NUMBERS ARE LISTED
BELOW:
1 MODULATION WHEEL
OR LEVER
2 BREATH CONTROLLER
3 PRESSURE: REV 1 DX7
4 FOOT PEDAL
5 PORTAMENTO TIME
6 DATA ENTRY
7 VOLUME
8 BALANCE
9 UNDEFINED
10 PAN
The MIDI controller A-B-C-D must have both a source (0-31) and a control destination assigned.
MIDI CONTROLLER ASSIGN
Classic Keys allows you to assign up to
four realtime control sources from your
MIDI controller. These control sources
could be modulation wheels, data sliders
or whatever. In this screen, you set up
which controllers will be received by
Classic Keys. What effect the controller
will have is programmed separately for
each preset. MIDI controllers are each
assigned a letter, A-D. Each controller
letter can be assigned to a MIDI realtime
controller from 01-31. Note: If controller
numbers 7 or 10 are selected, they will
override the standard MIDI volume and
pan control routings.
CONTROLLER #
A:01 B:02
Next Screen:
CONTROLLER #
C:03 D:04
For more information on MIDI control-
lers, see “MIDI Realtime Controls” in
chapter 5, Preset Programming.
To Next Page
Loading...
Need help?
General
