E-Mu EMAX - PART 3 REFERENCE SECTION; GENERAL INSTRUCTIONS; MASTER MODULE; SAMPLE MODULE

Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 4
PART 3 REFERENCE SECTION
GENERAL INSTRUCTIONS
1. SELECTING THE CURRENT PRESET
2. EXITING A FUNCTION
3. KEYBOARD NUMBERING PROTOCOL
4. DISK HANDLING
Common courtesy for disks
Disk type
The disk drive
Labeling disks
Write-protecting disks
Inserting the disk in the drive
Always have a disk in the drive!
FUNCTION BUTTONS
TRANSPOSE
DYNAMIC ALLOCATION
LOAD ALL
ENTER DATA
MASTER MODULE
1. MASTER TUNE
2. MEMORY REMAINING
3. VELOCITY CURVE
4. ERASE ALL MEMORY
5. FORMAT DISK
6. COPY DISK
7. BIRD RUN
8. SPECIAL FUNCTIONS
1 Copy Software
2 MIDI Overflow
3 Disable Channel
4 Recalibrate
5 Audition Note
6 MIDI Analyzer
7 Software Revision
SAMPLE MODULE
1. VU MODE/GAIN
2. PLACE SAMPLE
3. SAMPLE RATE
4. SAMPLE LENGTH
5. THRESHOLD
6. ARM SAMPLING
7. FORCE SAMPLING
8. STOP SAMPLING
9. CHANGE CURRENT SAMPLE
DIGITAL PROCESSING MODULE
0. CHANGE CURRENT VOICE
1. TRUNCATE (SET SAMPLE START/END)
2. SET LOOP START and LOOP LENGTH POINTS
3. SET RELEASE LOOP START AND LOOP LENGTH POINTS
4. LOOP ON, LOOP IN RELEASE, AND BACKWARDS MODES
5. TAPER
6. SPLICE
7. COMBINE VOICES