E-Mu EMAX - Create Preset XX; Erase Preset XX; Copy Preset

Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 71
Module: PRESET MANAGEMENT 3 Function: CREATE PRESET
Creating a Preset provides a home for all those great samples you have.
1. Activate PRESET MANAGEMENT 3. The display says:
...where XX defaults to the first empty Preset. Select the desired Preset number (use the slider, or
numeric keypad) and press ENTER.
Note: It you select a Preset, which already exists, the display will ask if you want to overwrite (that
means erase, so think twice!) the existing Preset.
Press YES to overwrite, NO to return to the Module Identifier.
2. The display will now give you the chance to rename the Preset. Name the preset as described in
Preset Management 6 and then press ENTER to return to the Module Identifier.
Module: PRESET MANAGEMENT 4 Function: ERASE PRESET
Here’s how to erase an unneeded Preset.
1. Activate PRESET MANAGEMENT 4. The display says:
...where XX is the Preset to be erased (this defaults to the Current Preset). Select the Preset to be
erased then press ENTER.
2. The display will ask...
To erase Preset XX, press YES, or press NO to return to the Module Identifier.
Module: PRESET MANAGEMENT 5 Function: COPY PRESET
Use this function to copy one Preset into another Preset.
1. Activate PRESET MANAGEMENT 5. The display says:
...where XX is the Preset to be copied (the source Preset; this defaults to the Current Preset). Select
the Preset to be copied (use the data slider or numeric keypad) then press ENTER.
2. The display will ask...
Create Preset XX
Select A Preset
Erase Preset XX
Select A Preset
Erase Preset XX
A
re
y
ou Sure? Y/N
Copy PXX
Select A Preset
Copy PXX
Select A Preset