Emax Owners Manual
© 1986 E-mu Systems, Inc. Enhanced by The Emulator Archive 2001 Page 68
2. Activate DIGITAL PROCESSING 7. The display now says:
..where XX is a Preset number. Since there are two Samples used in combining, first the Preset
containing the second Sample must be identified. Select the Preset, then press ENTER.
3. The display says:
Play a note within the range of the desired Voice, then press ENTER. The Sample used by this Voice
will be combined with the Sample used by the first Voice.
4. The display now asks:
If you’re having second thoughts, press NO. Otherwise, press YES to permanently combine the two
Samples.
5. The display will say “Combining” for as long as it takes to combine the two Samples. Depending on
the Sample length, this can be a very long process. ..if you need to catch up on your reading, now is
a good time. Or, you can send out for pizza.
Module: DIGITAL PROCESSING 8 Function: CROSSFADE LOOP
This virtually eliminates a loop’s splicing glitch by cross fading the end and beginning of the loop.
1. Activate DIGITAL PROCESSING 8. The display will say:
If you don’t mind changing the data, press YES. Otherwise, press NO to return to the Module
Identifier.
2. The display now asks:
...where Linear is the default value. Use the data slider to select between Linear (a straight
mathematical crossfade) and Equal Power (a weighted crossfade that produces no apparent level
shift). After making your choice, press ENTER.
Combine From PXX
Select A Preset
Select Voice
Play A Key
Combine
Permanently? Y/N
Crossfade Loop:
Changes Data!OK?
Linear or EqPwr?
Linear
To Next Page
Loading...